1 April 1991 Characterization, modeling, and design of dielectric resonators based on thin ceramic tape
Author Affiliations +
Abstract
A novel developmental material for dielectric resonators has been characterized for use in microwave hybrid circuits. The material is in the form of a thin tape laminated on a conventional 96 alumina substrate. Significantly different experimental methods had to be employed for material characterization in the low frequency (10 KHz - 50 MHz) and high frequency (100 MHz 2 GHz) regions. Because the new material is in the form of a thin tape to properly characterize the tape it was necessary to separate the tape and substrate materials with a buried ground plane. Such separation was achieved by using a buried ground plane layer. A 1. 75 GHz microwave filter based on a dielectric tape fully integrated with the substrate was built using standard hybrid processes and thick film conductors. A good correlation was achieved between experimental results and computer modelling data.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jacqueline H. Morris, Yakov Belopolsky, "Characterization, modeling, and design of dielectric resonators based on thin ceramic tape", Proc. SPIE 1389, Microelectronic Interconnects and Packages: Optical and Electrical Technologies, (1 April 1991); doi: 10.1117/12.25526; https://doi.org/10.1117/12.25526
PROCEEDINGS
13 PAGES


SHARE
Back to Top