1 March 1991 Three-beam CD optical pickup using a holographic optical element
Author Affiliations +
Proceedings Volume 1401, Optical Data Storage Technologies; (1991); doi: 10.1117/12.26133
Event: Singapore, 1990, -, Singapore
Abstract
A three beam CD optical pickup has been developed with a holographic optical element (HOE). The HOE has a hologram for beam splitting and servo signal generation on one side of a glass substrate, and a grating for tracking-beam generation on the other side. The hologram pattern is divided into two regions. The grating periods of these regions are different from each other, so that the focus error signal is detected by Foucault knife-edge method. And also the radial error signal is detected by the twin-spot method. The HOE is cemented at the top of a package in which a laser diode and a photodiode for signal detection are mounted. The HOE offers a improvement of environmental stability of the pickup too. In spite of the usage of a plastic housing, the optical pickup shows superior characteristics of environmental stability.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yoshio Yoshida, Takahiro Miyake, Yukio Kurata, Toshio Ishikawa, "Three-beam CD optical pickup using a holographic optical element", Proc. SPIE 1401, Optical Data Storage Technologies, (1 March 1991); doi: 10.1117/12.26133; http://dx.doi.org/10.1117/12.26133
PROCEEDINGS
8 PAGES


SHARE
KEYWORDS
Holographic optical elements

Holograms

Signal detection

Beam splitters

Diffraction gratings

Servomechanisms

Diffraction

Back to Top