1 July 1991 Selectable one-to-four-port, very high speed 512 x 512 charge-injection device
Author Affiliations +
Abstract
A high-speed 512 X 512 charge injection device with selectable one to four video ports has been developed, fabricated, and tested beyond the designed speed of operation. The imager has four independently controllable video ports allowing for all possible combinations. This is accomplished by having each port hard wired to one out of every four rows sequentially. Each port is selected via a multiplexer in the sequence desired. The horizontal scanner was designed to operate up to 30 MHz. The device was tested at the wafer level to 42 Mhz element rate per port. This element rate allows a maximum of 168 MHz element rate with four ports operating in parallel.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jeffrey J. Zarnowski, Jeffrey J. Zarnowski, Bryn Williams, Bryn Williams, Matthew A. Pace, Matthew A. Pace, Michael Joyner, Michael Joyner, Joseph Carbone, Joseph Carbone, Claudia Borman, Claudia Borman, Frank S. Arnold, Frank S. Arnold, Mark V. Wadsworth, Mark V. Wadsworth, } "Selectable one-to-four-port, very high speed 512 x 512 charge-injection device", Proc. SPIE 1447, Charge-Coupled Devices and Solid State Optical Sensors II, (1 July 1991); doi: 10.1117/12.45324; https://doi.org/10.1117/12.45324
PROCEEDINGS
11 PAGES


SHARE
Back to Top