1 July 1991 0.5-micron deep-UV lithography using a Micrascan-90 step-and-scan exposure tool
Author Affiliations +
Abstract
Deep UV exposures utilizing wavelengths from 240-254 nm have been investigated for 0.5 micron lithography on a 0.35 NA step-and-scan exposure tool, the SVG Lithography Systems Inc. Microscan-90. Commercially available Shipley SNR-248 3X negative resist was characterized with statistically designed experiments, and the optimized single-level resist process was used for tool characterization at and below 0.5 micron. Examples of a new developmental positive resist are also shown. The effect of reflectivity variations with broad- band exposures are modeled and compared with the experimental results. Resolution and depth of focus (DOF) for both 0.4 and 0.5 micron features were studied over the full field. Results for contact holes over topography and critical dimension (CD) variation with DOF and exposure are presented. The tool focus control, stage precision, throughput, overlay capability on oxide and poly wafers, and particulate contamination studies are reported. Process latitude is evaluated. The tool and process compatibility for sub-half micron applications is discussed.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Birol Kuyel, Birol Kuyel, Mark William Barrick, Mark William Barrick, Alex Hong, Alex Hong, Joseph C. Vigil, Joseph C. Vigil, } "0.5-micron deep-UV lithography using a Micrascan-90 step-and-scan exposure tool", Proc. SPIE 1463, Optical/Laser Microlithography IV, (1 July 1991); doi: 10.1117/12.44821; https://doi.org/10.1117/12.44821
PROCEEDINGS
20 PAGES


SHARE
RELATED CONTENT


Back to Top