1 September 1991 Calibration of a CCD camera on a hybrid coordinate measuring machine for industrial metrology
Author Affiliations +
Proceedings Volume 1526, Industrial Vision Metrology; (1991) https://doi.org/10.1117/12.48240
Event: Industrial Vision Metrology, 1991, Winnipeg, Canada
Abstract
A methodology for the calibration of a CCD low-cost camera mounted on a CMM machine is described. Several kinds of geometric distortion are taken into account in the camera model. Five distortion parameters are introduced modeling both radial and non-radial effects. A two- phase methodology is developed for the parameter estimation. In the first phase, a closed-form solution is reached for the intrinsic and the extrinsic parameters neglecting distortion effects. In the second phase, an iterative procedure estimates separately the distortion and the non- distortion parameters, to avoid harmful interactions. The main novelty of the solution is the use of only linear systems, avoiding any non-linear optimization process. Low-level image processing used for calibration images is described. Experimental results and comparisons with more simplified camera models and estimation strategies are presented.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Elisabetta Bruzzone, Elisabetta Bruzzone, Fulvia Mangili, Fulvia Mangili, } "Calibration of a CCD camera on a hybrid coordinate measuring machine for industrial metrology", Proc. SPIE 1526, Industrial Vision Metrology, (1 September 1991); doi: 10.1117/12.48240; https://doi.org/10.1117/12.48240
PROCEEDINGS
17 PAGES


SHARE
RELATED CONTENT

Two methods for CCD camera's image center measurement
Proceedings of SPIE (February 22 2006)
Vision technology for locating container trucks
Proceedings of SPIE (October 27 2006)
High-performance camera calibration algorithm
Proceedings of SPIE (October 21 1993)

Back to Top