1 December 1991 Design and fabrication of large-format holographic lenses
Author Affiliations +
Abstract
Dichromated gelatin layers (DCG) facilitate the design and fabrication of large-format (1 m2) holographic optical elements (HOE) that exhibit high optical quality and diffraction efficiency. The subject matter of this report is the presentation of an optimized design and fabrication technique for the manufacturing of large-format diffractive optics. The emphasis is placed on the realization of homogeneous diffraction efficiency distribution across the aperture of the HOE. The nature of the holographic process requires precise control of the mechanical properties of the DCG layer such as moisture content, shrinking, swelling, hardness, and elasticity of the film, which specify the slant angle, the mean index of refraction, and the amplitude of the refractive index modulation. These properties ensure the attainment of the desired diffraction efficiency, bandwidth, and Bragg-shift. The results achieved in the development and fabrication of such layers are presented and their applicability as holographic solar concentrators is explained. The emphasis is also placed upon the development and realization of a novel copying technique for the batch reproduction and inexpensive manufacturing of large-format transmissive holograms that are used as focusing lenses in solar concentrators.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Christo G. Stojanoff, Ruediger Kubitzek, Stephan Tropartz, Olivier Brasseur, Klaus Froehlich, "Design and fabrication of large-format holographic lenses", Proc. SPIE 1527, Current Developments in Optical Design and Optical Engineering, (1 December 1991); doi: 10.1117/12.48637; https://doi.org/10.1117/12.48637
PROCEEDINGS
13 PAGES


SHARE
Back to Top