1 December 1991 Integrated optics bus access module for intramachine communication
Author Affiliations +
Abstract
The feasibility of a passive bidirectional fiber optic bus and the packaging considerations of a bus access module have been studied. The bus uses 110/125 micrometers HCS fiber and passive integrated optic couplers for bus access. The access couplers are asymmetric and were fabricated using a Ag-Na ion exchange process. The asymmetry of the coupler was 5 dB, the launch loss to the bus was 6 dB and the tap-off loss to the node was 11 dB. With the integrated optics coupler it is possible to connect 6 nodes to the bidirectional bus. It is also possible to realize a simple, easy-to-use, and reliable bus access module for intramachine communication. The integrated optics coupler, a LED chip, and a PIN-diode chip and transceiver electronics are packaged in an electrical connector with a two-fiber optical cable pigtail. Active and passive components are butt coupled to the coupler. The 0.5 dB alignment tolerances for the fiber pigtails, the LED, and the PIN-diode chips are +/- 5 micrometers .
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pentti Karioja, Pentti Karioja, Simo K. T. Tammela, Simo K. T. Tammela, Tapio Hannula, Tapio Hannula, } "Integrated optics bus access module for intramachine communication", Proc. SPIE 1533, Optomechanics and Dimensional Stability, (1 December 1991); doi: 10.1117/12.48849; https://doi.org/10.1117/12.48849
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT

Design of a waveguide with optics axes tilted by 45°...
Proceedings of SPIE (March 01 2016)
Fiber Optics Application To A-7 Aircraft
Proceedings of SPIE (July 23 1976)
Polymer waveguide-based multilayer optical connector
Proceedings of SPIE (February 23 2010)
Fiber Optic Entrance Links For Electric Utilities
Proceedings of SPIE (September 19 1980)
Multimode glass integrated optics
Proceedings of SPIE (July 25 1994)

Back to Top