Paper
1 August 1991 Optical fiber pressure transducer with improved sensitivity and linearity
Xiaobao Chen, Qianmei Chen
Author Affiliations +
Proceedings Volume 1572, International Conference on Optical Fibre Sensors in China OFS(C) '91; (1991) https://doi.org/10.1117/12.49983
Event: International Conference on Optical Fibre Sensors in China, 1991, Wuhan, China
Abstract
In this paper, an optical fiber pressure transducer, measuring range from 0 to 1.6 MPa, resolution 0.0001 MPa, and non-linearity error less than 0.5%, is presented. Similar to previous techniques, this transducer determines pressure on the strain of the pressure diaphragm. But it introduces a multi-mode Y splitter in the illuminating fiber of the primary two-fiber displacement sensor to receive the reference signal collected by illuminating the fiber itself. Theoretical analysis and trial data show that the pressure transducer based on this design has improved sensitivity, while its non-linearity error has decreased. It is confirmed also that the pressure transducer has long term stability.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaobao Chen and Qianmei Chen "Optical fiber pressure transducer with improved sensitivity and linearity", Proc. SPIE 1572, International Conference on Optical Fibre Sensors in China OFS(C) '91, (1 August 1991); https://doi.org/10.1117/12.49983
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Transducers

Sensors

Optical fibers

Temperature metrology

Error analysis

Reflectivity

Signal detection

Back to Top