1 March 1992 Qualification of mechanically fabricated IR filters using FTIR spectroscopy
Author Affiliations +
Proceedings Volume 1575, 8th Intl Conf on Fourier Transform Spectroscopy; (1992) https://doi.org/10.1117/12.56496
Event: Eighth International Conference on Fourier Transform Spectroscopy, 1991, Lubeck-Travemunde, Germany
Abstract
A new method for the mechanical manufacturing of microstructured bodies has been developed by the Karisruhe Nuclear Research Center in cooperation with the MesserschmittBôlkow-Blohm company, Munich-Ottobrunn. This technique is based on the surface structuring of foils by means of high-precision machining using, for example, rectangular profiled microdiamondsi. In Fig. 1, a scanning electron microscopy (SEM) of a 100 pm thick aluminum foil with a rectangular groove structure is shown. If copper foils, which have been microstructured in the same way, are stacked on top of each other and are subjected to diffusion welding, finely structured bodies are obtained which are covered by a multitude of microscopically small channels (Fig. 2). The copper body shown possesses approximately 8700 channels/cm2. The optical transparency is about 57 %. The length of the microstructure samples is freely optional within wide limits.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
W. Bier, W. Bier, Andreas E. Guber, Andreas E. Guber, } "Qualification of mechanically fabricated IR filters using FTIR spectroscopy", Proc. SPIE 1575, 8th Intl Conf on Fourier Transform Spectroscopy, (1 March 1992); doi: 10.1117/12.56496; https://doi.org/10.1117/12.56496
PROCEEDINGS
2 PAGES


SHARE
Back to Top