1 November 1991 Application of statistical design in materials development and production
Author Affiliations +
Abstract
The role and benefits of using statistical design in experiments for the development and optimization of glass and ceramic products are examined. It is shown that considerable benefits can be derived by following an appropriate design in which a number of factors (processing parameters) are varied simultaneously while the system response such modulus of rupture, toughness, optical loss, etc is monitored. If it is assumed that ccnplex factor interactions (e.g., having greater than four factors) can be ignored, it is further shown that essentially the same conclusions can be drawn from an examination of only a fraction of the whole factorial matrix. As a consequence, significantly less trials are required to determine (screen and rank) the various single- and multi-factor effects (having up to four factors) on the measured property. Examples drawn from recent work in materials development are presented.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
G. Pouskouleli, T. A. Wheat, A. Ahmad, Sudhanshu Varma, S. Eswar Prasad, "Application of statistical design in materials development and production", Proc. SPIE 1590, Submolecular Glass Chemistry and Physics, (1 November 1991); doi: 10.1117/12.50213; https://doi.org/10.1117/12.50213
PROCEEDINGS
12 PAGES


SHARE
Back to Top