1 January 1992 Positional errors due to substrate charging in e-beam lithography tools
Author Affiliations +
Abstract
As computer logic and memory device dimensions shrink to submicron range the mask lithography tool placement accuracy becomes more critical. Charging effects in e-beam tools considered irrelevant in the past, today represent a large portion of the total error budget. Two such effects on glass substrates are described in this paper. The first is brought about by incomplete Cr coating of the edges, while the second is due to resist charging. It is shown that conductive coating of the edges is necessary if the exposed patterns fall closer than approximately 25 mm from the edge. Thin resist coatings less than 1.0 um can be tolerated when combined with Au mesh shielding techniques and application of electrostatic fields near the target. This gives the low energy secondary electrons a "harmless" path, reducing the charge accumulation on the resist surface.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Maris A. Sturans, Maris A. Sturans, Jacek G. Smolinski, Jacek G. Smolinski, Jeffrey A. Robinson, Jeffrey A. Robinson, } "Positional errors due to substrate charging in e-beam lithography tools", Proc. SPIE 1604, 11th Annual BACUS Symposium on Photomask Technology, (1 January 1992); doi: 10.1117/12.56933; https://doi.org/10.1117/12.56933
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT

New grade of 9 inch size mask blanks for 450mm...
Proceedings of SPIE (October 07 2014)
New grade of 9 inch size mask blanks for 450mm...
Proceedings of SPIE (November 10 2015)
New concept for negative-tone electron-beam resist
Proceedings of SPIE (July 23 1996)
Analysis of various blur effects on mask CD distortion
Proceedings of SPIE (November 09 2005)
Cost-effective DUV PSM process
Proceedings of SPIE (August 24 1999)

Back to Top