Paper
26 March 1992 Large optics from silicon carbide
Roger A. Paquin, Matthew B. Magida, Cynthia L. Vernold
Author Affiliations +
Abstract
Silicon carbide (SiC) has become a legitimate competitor to beryllium (Be) for large lightweight mirrors due to its high stiffness to weight ratio and low thermal expansion. However, there are many kinds of SiC and some are better suited for mirrors than others. After a comparison of the various SiC types we described one type of reaction bonded SiC that can be near-net-shape fabricated into very lightweight mirrors in sizes ranging from a few centimeters to greater than two meters. Lightweight spherical mirrors of 0.18 and 0.50 m diameter have been fabricated and polished to very low surface roughness. The blank and optical fabrication techniques are described, and characterization data are presented for uncoated polished surfaces. These mirrors have surface roughness of 8 - 15 angstroms rms and (lambda) /10 figure
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Roger A. Paquin, Matthew B. Magida, and Cynthia L. Vernold "Large optics from silicon carbide", Proc. SPIE 1618, Large Optics II, (26 March 1992); https://doi.org/10.1117/12.58042
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silicon carbide

Mirrors

Polishing

Silicon

Surface finishing

Lightweight mirrors

Coating

RELATED CONTENT

Silicon cladding for mirror substrates
Proceedings of SPIE (August 21 2009)
Evaluation of segmented and brazed mirror assemblies
Proceedings of SPIE (August 18 2005)
Large Scale Fabrication Of Lightweight Si/SiC LIDAR Mirrors
Proceedings of SPIE (October 26 1989)
Surface modification of SiC mirror by IARE method
Proceedings of SPIE (February 18 2011)

Back to Top