1 February 1992 Stability and vibration control in synchrotron light source buildings
Author Affiliations +
Abstract
Synchrotron light sources have undergone three generations of development in the last two decades. The National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory has two "second generation" storage rings that currently provide the world's most intense sources of photons in the VUV and X-ray spectral ranges. There are almost 90 beam lines serving a community of 2600 scientists from 370 institutions. They are engaged in basic and applied research in physics, chemistry, biology, medicine, materials science and various technologies. When design of the NSLS began in 1977, emphasis was given to the stability of the concrete slab on which the storage rings and experimental beam lines were placed. Stability is the result of controlling: . vibration from sources internal and external to the building, . thermal effects of air and water temperature variations, . foundation settlement and contact between the slab and underlying subsoil. With the advent of new research where highly focused beams of x-rays must be placed on increasingly smaller targets located 35 meters or more from the source, and the development of x-ray lithography with resolutions approaching 0. 1 micron at chip exposure stations, even greater attention to stability is required in building designs.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jules B. Godel, "Stability and vibration control in synchrotron light source buildings", Proc. SPIE 1619, Vibration Control in Microelectronics, Optics, and Metrology, (1 February 1992); doi: 10.1117/12.56833; https://doi.org/10.1117/12.56833
PROCEEDINGS
12 PAGES


SHARE
Back to Top