Paper
25 July 1979 Computer-Controlled Laser Beams in Object Dimension Measurements
J. Johansson, C. O. Falt, S. T. Eng
Author Affiliations +
Proceedings Volume 0164, 4th European Electro-Optics Conf; (1979) https://doi.org/10.1117/12.965514
Event: Fourth European Electro-Optics Conference, 1978, Utrecht, Netherlands
Abstract
This paper describes some general features of a computer-controlled laser system for noncontact measurements of dimensions of objects. The laser beams are scanned over the object and a system of detectors mounted behind the object detects whether the beams are shadowed by the object or not. The detector signals are converted to digital values and transferred to a minicomputer, where they are processed. This may require special software to allow the dimensional data to be presented in real time. An experimental system with a HeNe laser and controlled by an HP 21MX minicomputer has been built and tested. At a rate of 100 measurements per second the systematic error is in the order of 1 mm for absolute measurements and 0.1 mm for relative measurements. The imprecision is about 0.1 mm for both cases.
© (1979) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. Johansson, C. O. Falt, and S. T. Eng "Computer-Controlled Laser Beams in Object Dimension Measurements", Proc. SPIE 0164, 4th European Electro-Optics Conf, (25 July 1979); https://doi.org/10.1117/12.965514
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Computing systems

Error analysis

Signal detection

Laser systems engineering

Mirrors

Control systems

RELATED CONTENT

CARMENES: The CARMENES instrument control software suite
Proceedings of SPIE (August 08 2016)
Aerodyne research mobile infrared methane monitor
Proceedings of SPIE (May 01 1991)
Process Control During Laser Machining
Proceedings of SPIE (March 24 1989)
Real-Time Minicomputer Control Of The 13 Wavefront Sensor
Proceedings of SPIE (August 08 1980)
Scanning mirror uniformity optimum control
Proceedings of SPIE (October 03 1996)

Back to Top