1 August 1992 Reduction of photodegradation in optical fibers for excimer laser applications
Author Affiliations +
Proceedings Volume 1649, Optical Fibers in Medicine VII; (1992) https://doi.org/10.1117/12.60225
Event: OE/LASE '92, 1992, Los Angeles, CA, United States
Abstract
Power transmission of excimer laser radiation at 308 nm through waveguides is of growing importance in medical applications. The maximum energy densities achievable at distal fused silica optical fiber ends are limited by the surface damage threshold of fused silica and by photodegradation of the optical fiber material. Limitations due to the surface damage threshold at the front surface can be avoided by applying tapered fiber geometries. In order to minimize photodegradation effects color center formation caused by high energy UV radiation has to be reduced. This involves optimization of the fused silica material properties and the necessity of modifying the manufacturing processes. Measurements on all silica fibers at 308 nm wavelength (XeCl excimer laser) show different influences of core material manufacturing. Not only the overall decrease of transmission but also the dependence of transmission changes on the number of laser pulses and defect annealing are strongly affected. Consequences for improved performance of all silica optical fibers in angioplasty are demonstrated by measurements on specially produced samples.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ulrich Grzesik, Heinz Fabian, Walter Neu, Georg Hillrichs, "Reduction of photodegradation in optical fibers for excimer laser applications", Proc. SPIE 1649, Optical Fibers in Medicine VII, (1 August 1992); doi: 10.1117/12.60225; https://doi.org/10.1117/12.60225
PROCEEDINGS
11 PAGES


SHARE
Back to Top