Critical process parameters of an acetal-based deep-UV photoresist

Horst Roeschert; Klaus Juergen Przybilla; Walter Spiess; Horst Wengenroth; Georg Pawlowski

doi:10.1117/12.59724

1 June 1992 Critical process parameters of an acetal-based deep-UV photoresist

Horst Roeschert, Klaus Juergen Przybilla, Walter Spiess, Horst Wengenroth, Georg Pawlowski

Proceedings Volume 1672, Advances in Resist Technology and Processing IX; (1992) https://doi.org/10.1117/12.59724
Event: Microlithography '92, 1992, San Jose, CA, United States

Abstract

The present paper gives a first introduction into the resist scheme and the chemistry of a newly developed acetal-based, positive tone deep UV photoresist, called RS 1594/E. The material consists of a phenolic polymer, a dissolution inhibitor, and a photoactive compound. The dissolution inhibition of the polymer is achieved using a poly-N,O-acetal, which undergoes an efficient acid catalyzed bond cleavage. The radiation induced catalytic reaction starts at ambient temperatures and the latent image stabilizes in a dark reaction. The process is completed by the application of a post exposure bake resulting in the formation of highly soluble dissolution promoting fragments, namely aldehyde and alcohol derivatives. The properties of the main resist components have been studied in detail and their influence on the lithographic performance is discussed. In addition, new critical process parameters have been identified and their impact on the lithographic performance of RS 1594/E was analyzed. The dissolution rate ratio between exposed and unexposed resist areas, the post exposure bake temperature, and the delay time between exposure and post exposure bake were determined as the most significant parameters and are discussed in more detail. Prolonged intervals are found to be mainly responsible for the increased formation of an insoluble surface inhibition layer (`T-topping') and a significant linewidth decrease. Compared to state-of-the-art materials, RS 1594/E shows a noticeable improvement in delay time behavior. Even after 60 minutes delay between exposure and PEB acceptable results may be achieved without any formation of `T- shaped' profiles, and a nearly constant linewidth. The surface inhibition effect is markedly reduced by the use of certain organic additives and an optimized photoacid generator. SEM pictures of 0.24 micrometers , 0.26 micrometers , and 0.28 micrometers line and space patterns demonstrate the excellent resolution capability of RS 1594/E.

Citation Download Citation

Horst Roeschert, Klaus Juergen Przybilla, Walter Spiess, Horst Wengenroth, and Georg Pawlowski "Critical process parameters of an acetal-based deep-UV photoresist", Proc. SPIE 1672, Advances in Resist Technology and Processing IX, (1 June 1992); https://doi.org/10.1117/12.59724

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available