Translator Disclaimer
12 August 1992 Miniature closed-cycle cooler for FPA detectors
Author Affiliations +
Abstract
The various types of the Focal Plane Array JR detectors presently in development or under production are characterized by their relatively large size compared with the traditional discrete element detectors. Most of these FPAs contain "on-board" signal processors allowing the number of electrical leads to the cooled detectors plane to be independent of the number of pixels in the array. In general, the total heat load of such detectors is 1.5 -2.0 times larger than an equivalent discrete element type detector assembly. On the other hand, the size of these FPA's dictates the thermal mass of the detector array itself, and in particular when the whole detector/cooled radiation shield/cold optics is considered to be of an order of magnitude larger than an equivalent discrete elements detector assembly. This fact causes the cooldown time requirement to be the lead factor when cooling power is considered, rather than the steady state heat load. In order to achieve miniaturization, low input power and fast cooldown time, a combined team of Cincinnati Electronics, Mason, Ohio and RICOR Ltd., En Harod, Israel are working on the development phase of an integral cooler/dewar assembly - IDCA, specially tailored for FPA type detectors. The design concepts, technical parameters and some experimental test results are presented.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nachman Pundak, Gregory R. Leonard, J. Brian Toft, and Jan Tollefson "Miniature closed-cycle cooler for FPA detectors", Proc. SPIE 1683, Infrared Focal Plane Array Producibility and Related Materials, (12 August 1992); https://doi.org/10.1117/12.137783
PROCEEDINGS
5 PAGES


SHARE
Advertisement
Advertisement
Back to Top