1 September 1992 Resolution improvement for HgCdTe IRCCD
Author Affiliations +
Abstract
This paper describes a resolution improvement for a mercury cadmium telluride (MCT) infrared charge-coupled device (IRCCD) using a new microscanner. To keep the microscanner compact, the scanner prism is placed between the lens and the IRCCD, and driven by a bimorph piezoelectric actuator. By compensating the drive pulse and optimizing the prism thickness, the microscanner gives a fast and stable response with low distortion. The medium wavelength imager developed for the microscanner gives a 128 X 128 pixel thermal image in the 3 to 5 micrometers band using a 64 X 64 element IRCCD. The Nyquist frequency was increased from 10 to 20 cycles/mm to reduce aliasing without decreasing the S/N ratio. The noise equivalent temperature difference (NETD) was measured at 0.06 K with an f-1.7 lens. The modulation transfer function (MTF) was estimated by considering the scan distortion and the pixel aperture profile. By optimizing the aperture profile of the photodiode, the MTF at the Nyquist frequency was increased from 0 to 20%.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kenji Awamoto, Yuichiro Ito, Hiroyuki Ishizaki, Yutaka Yoshida, "Resolution improvement for HgCdTe IRCCD", Proc. SPIE 1685, Infrared Detectors and Focal Plane Arrays II, (1 September 1992); doi: 10.1117/12.137814; https://doi.org/10.1117/12.137814
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Review of Schottky-barrier imager technology
Proceedings of SPIE (September 01 1990)
Step scan method to enlarge the field of view of...
Proceedings of SPIE (August 30 2004)
"Construction And Performance Of A 320 X 244 Element IR...
Proceedings of SPIE (October 11 1989)
I.R. Imaging With Staring Arrays
Proceedings of SPIE (May 01 1986)

Back to Top