25 November 1992 Advances on aluminum first-surface solar reflectors
Author Affiliations +
Abstract
Aluminum first surface mirrors have some advantages over second surface mirrors as has been discussed. At this stage of development some advantages are obtained: the first advantage was using two electron guns, one for aluminum evaporation permitting us to eliminate or to minimize the pinholes and the other to allow the evaporation of SiO without any mirror contamination as it was before due to the air when the chamber was opened to introduce the SiO, despite having only one e-gun in the laboratory. The second advantage was a better adherence between the aluminum film and the Si2O3, this last substance obtained with an oxidation of SiO with some oxygen inside the evaporation chamber (10-4 Torr). This improvement was due to the use of two e-guns that permit us not to open the chamber. These mirrors are actually under test in the environmental chamber for accelerated weather evaluations. One important aspect is the cleaning of the glass substrate. The chromic mixture cleaning is one of the most effective.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rafael Almanza, Rafael Almanza, Jiefeng Chen, Jiefeng Chen, Marcos Mazari, Marcos Mazari, } "Advances on aluminum first-surface solar reflectors", Proc. SPIE 1727, Optical Materials Technology for Energy Efficiency and Solar Energy Conversion XI: Selective Materials, Concentrators and Reflectors, Transparent Insulation and Superwindows, (25 November 1992); doi: 10.1117/12.130516; https://doi.org/10.1117/12.130516
PROCEEDINGS
6 PAGES


SHARE
Back to Top