2 March 1993 Photoresist grating profile estimation by using different incidence angles
Author Affiliations +
Proceedings Volume 1732, Holographics International '92; (1993) https://doi.org/10.1117/12.140387
Event: Holographics International '92, 1992, London, United Kingdom
Abstract
Positive resist was used to record holographic plane gratings. In order to have rectangular groove profiles a nonlinearly acting developer liquid was chosen. When gratings were read, the incidence angle of the reading laser was varied from the Bragg angle to the direction of the plate normal. If the grating profiles were rectangular the diffraction efficiency (DE) at normal incidence should have been low. However, noticeable DE:s were detected. The high efficiencies were due to the rounding of the grating groove edges. Thus by measuring the DE at different angles the rounding of the profile could be estimated.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Olli Salminen, Olli Salminen, } "Photoresist grating profile estimation by using different incidence angles", Proc. SPIE 1732, Holographics International '92, (2 March 1993); doi: 10.1117/12.140387; https://doi.org/10.1117/12.140387
PROCEEDINGS
5 PAGES


SHARE
Back to Top