23 November 1992 Development and industrialization of supermirror multilayers used for neutron guides
Author Affiliations +
Abstract
Great improvements have been made in realizing super-mirrors multilayers, but only on laboratory scale samples. In particular, supermirrors with a cut off twice that of natural nickel and a reflectivity higher than 97% on (10 X 4) cm2 substrates have been obtained. To use such supermirrors in the construction of neutron guides, it was necessary to reach the same results on much larger pieces. We describe the design and set up of special equipment for super polishing the substrates, and sputtering the multilayer-control equipment which has been realized for factory acceptance of each piece.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Francois J. Samuel, Francois J. Samuel, Bernard Farnoux, Bernard Farnoux, Benedicte Ballot, Benedicte Ballot, Bernard Vidal, Bernard Vidal, } "Development and industrialization of supermirror multilayers used for neutron guides", Proc. SPIE 1738, Neutron Optical Devices and Applications, (23 November 1992); doi: 10.1117/12.130619; https://doi.org/10.1117/12.130619
PROCEEDINGS
13 PAGES


SHARE
RELATED CONTENT

Results of a polishing study for SCHOTT XLD glasses
Proceedings of SPIE (September 24 2015)
Experiments With Diamond-Turned Metal X-Ray Mirrors
Proceedings of SPIE (August 09 1979)
Improvement in the synthesis of Ni/Ti neutron mirrors
Proceedings of SPIE (November 23 1992)
Neutron, X Ray Scattering And TEM Studies Of Ni Ti...
Proceedings of SPIE (January 18 1989)
Construction Of Neutron Guide Tubes
Proceedings of SPIE (January 18 1989)
Finish machining of optical surfaces
Proceedings of SPIE (August 01 1990)

Back to Top