7 December 1992 Optical fibers from sol-gel-derived germania-silica glasses
Author Affiliations +
Step index multimode optical fibers were successfully drawn from germania doped silica rods prepared by sol-gel process. The fiber, drawn using rod-in-tube technique, had a 100 micron core with a pure silica cladding of 140 micron. The numerical aperture of the fiber was 0.21. Initial experimental results indicate an attenuation of 20 dB/km at 850 nm wavelength. Precursors used for sol preparation were tetraethyl orthosilicate, Si(OC2H5)4 and tetraethyl orthogermanate, Ge(OC2H5)4. Clear wet gels were routinely produced without any problem of premature precipitation of germanium dioxide even at high dopant concentration levels. The gels were dried by supercritical drying technique. Dry gels were consolidated to clear glass samples routinely at a temperature of 1300 degree(s)C. Fiber was drawn from these rods at a temperature of 1800 degree(s)C. The sintering parameters, i.e., type of gas flow at different steps of the sintering operation, duration of such steps and temperature were optimized to eliminate reboil of the glass above 1800 degree(s)C, resulting in bubble-free glass fibers.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fikret Kirkbir and S. Ray Chaudhuri "Optical fibers from sol-gel-derived germania-silica glasses", Proc. SPIE 1758, Sol-Gel Optics II, (7 December 1992); doi: 10.1117/12.132010; https://doi.org/10.1117/12.132010


Shaping Fibre Preforms From Prefabricated Powders
Proceedings of SPIE (December 31 1986)
UV curable low index hybrid glass as hard cladding for...
Proceedings of SPIE (September 23 2005)
Longitudinally graded optical fibers
Proceedings of SPIE (March 21 2013)

Back to Top