Paper
7 December 1992 Semihumid gels as matrices for laser media
Denis Larrue, J. Zarzycki, Michael Canva, Patrick M. Georges, Alain Brun
Author Affiliations +
Abstract
Laser dyes were trapped in SiO2 xerogel host matrices to obtain a solid state dye laser. The evolution of the mechanical properties of two kinds of matrices, 'classic' and 'sono' gels, was followed during drying. A new impregnation process was performed on these xerogels: impregnation with a 'sono' sol. The influence of this treatment on certain physical and mechanical properties of the resulting impregnated gels was studied. The results indicate that impregnation substantially improves hardness, elastic modulus and fracture stress. The samples can then be easily polished to obtain optical quality surfaces and be used in a laser cavity. Moreover, optical properties related to laser emission of these materials such as efficiency, lifetime and longevity are better when the laser dye doped xerogels are impregnated. The organic dye molecule used was sulforhodamine 640, and results were obtained six months after their synthesis, with a pump beam working at a 5 Hz repetition rate with 450 (mu) J/pulse energy level. With the first pump shot on a fixed point of the samples, tunability from 600 to 650 nm, 60 (mu) J threshold, 2600 pump shots lifetime and a 10.5% slope efficiency were achieved using an impregnated 'sono' gel matrix.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Denis Larrue, J. Zarzycki, Michael Canva, Patrick M. Georges, and Alain Brun "Semihumid gels as matrices for laser media", Proc. SPIE 1758, Sol-Gel Optics II, (7 December 1992); https://doi.org/10.1117/12.132034
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Matrices

Dye lasers

Liquids

Molecules

Solids

Polishing

Surface finishing

RELATED CONTENT

Highly stable solid state dye lasers based on polymer filled...
Proceedings of SPIE (September 01 2004)
Laser performance in dye-molecule-doped xerogels
Proceedings of SPIE (October 02 1997)
Even-mode generation in microcavity dye laser
Proceedings of SPIE (August 03 2007)
Novel solid state dye laser host
Proceedings of SPIE (June 01 1994)
Control of the texture of gel silica monoliths by aging...
Proceedings of SPIE (December 07 1992)

Back to Top