14 December 1992 Infrared sensor and window system issues
Author Affiliations +
Abstract
EO/IR windows are a significant challenge for the weapon system sensor designer who must design for high EO performance, low radar cross section (RCS), supersonic flight, durability, producibility and affordable initial and life cycle costs. This is particularly true in the 8 to 12 micron IR band at which window materials and coating choices are limited by system design requirements. The requirements also drive the optimization of numerous mechanical, optical, materials, and electrical parameters. This paper addresses the EO/IR window as a system design challenge. The interrelationship of the optical, mechanical, and system design processes are examined. This paper presents a summary of the test results, trade studies and analyses that were performed for multi-segment, flight-worthy optical windows with superior optical performance at subsonic and supersonic aircraft velocities and reduced radar cross section. The impact of the window assembly on EO system modulation transfer function (MTF) and sensitivity will be discussed. The use of conductive coatings for shielding/signature control will be discussed.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Charles H. Hargraves, Charles H. Hargraves, James M. Martin, James M. Martin, } "Infrared sensor and window system issues", Proc. SPIE 1760, Window and Dome Technologies and Materials III, (14 December 1992); doi: 10.1117/12.130809; https://doi.org/10.1117/12.130809
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT

Hot infrared domes: a case study
Proceedings of SPIE (September 30 1990)
Development of a real time MTF test bench for visible...
Proceedings of SPIE (November 08 2010)
Protective broadband window coatings
Proceedings of SPIE (June 26 1997)

Back to Top