6 April 1993 "Cul-de-sac" microstrip resonators for high-speed integrated optical commutator switches
Author Affiliations +
Proceedings Volume 1794, Integrated Optical Circuits II; (1993) https://doi.org/10.1117/12.141916
Event: Fibers '92, 1992, Boston, MA, United States
Abstract
A novel microstrip resonator structure for use with integrated Y-branch optical modulators fabricated in Ti:LiNbO3 is proposed. The legs of the structure are intended to act as the electrodes of the modulator, with light being directed into each of the output waveguides of the Y-branch on alternate half-cycles of the standing wave excited in the resonator; forming an optical commutator switch. Such resonators having Al2O3 substrates were designed, fabricated, and tested. Measurements on one such resonator, operating at 7.12 GHz and having an unloaded quality factor of 123, indicating that 50 V should develop across the ends of its legs for 35 mW dissipated power; the corresponding values, from the model used to design the resonator, were 179, 50 V,and 24 mW, respectively. Using the model it is shown that a similar resonator fabricated on LiNbO3 should be able to develop about 50 V for 100 mW dissipated power at 15 GHz.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nicolas A.F. Jaeger, Nicolas A.F. Jaeger, Mingche Chen, Mingche Chen, } ""Cul-de-sac" microstrip resonators for high-speed integrated optical commutator switches", Proc. SPIE 1794, Integrated Optical Circuits II, (6 April 1993); doi: 10.1117/12.141916; https://doi.org/10.1117/12.141916
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT


Back to Top