Paper
21 May 1993 Morphology and crystallography of electromigration-induced transgranular slit failures in aluminum alloy interconnects
John E. Sanchez Jr., V. Randle, O. Kraft, E. Arzt
Author Affiliations +
Abstract
Microstructural and crystallographic characterizations of electromigration induced voiding and damage in Al and Al-2% Cu interconnects are presented. Scanning electron and focussed ion beam micrographs show that extended voiding in wide lines and transgranular slit voids in near bamboo lines are the preferred failure morphologies. Electron back scattered diffraction analysis of transgranular slit failure sites show a preferred <110> slit void orientation. Estimates of stresses required for stress assisted void growth in unpassivated interconnects are shown to be reasonably close to measured stress levels in films and interconnects. The transgranular void process is shown to be preferred over boundary voiding based on usual estimates for the variation of surface energy and random boundary energies in Al. Finally, line edge void growth into transgranular slit failures at favorably stressed and crystallographically oriented grain sites is presented as an empirical model for the observed electromigration induced failures in near bamboo interconnects lines.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
John E. Sanchez Jr., V. Randle, O. Kraft, and E. Arzt "Morphology and crystallography of electromigration-induced transgranular slit failures in aluminum alloy interconnects", Proc. SPIE 1805, Submicrometer Metallization: Challenges, Opportunities, and Limitations, (21 May 1993); https://doi.org/10.1117/12.145474
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Aluminum

Copper

Crystals

Photomicroscopy

Diffraction

Crystallography

Scanning electron microscopy

Back to Top