Translator Disclaimer
26 March 1993 Spatial sensor lag in virtual environment systems
Author Affiliations +
Proceedings Volume 1833, Telemanipulator Technology; (1993) https://doi.org/10.1117/12.142108
Event: Applications in Optical Science and Engineering, 1992, Boston, MA, United States
Abstract
This paper describes a testbed and method for characterizing the dynamic response of the type of spatial displacement transducers commonly used in VE applications. The testbed consists of a motorized rotary swing arm that imparts known displacement inputs to the VE sensor. The experimental method involves a series of tests in which the sensor is displaced back and forth at a number of controlled frequencies that span the bandwidth of volitional human movement. During the tests, actual swing arm angle and reported VE sensor displacements are collected and time stamped. Because of the time stamping technique, the response time of the sensor can be measured directly, independent of latencies in data transmission from the sensor unit and any processing by the interface application running on the host computer. Analysis of these experimental results allows sensor time delay and gain characteristics to be determined as a function of input frequency. Results from tests of several different VE spatial sensors are presented here to demonstrate use of the testbed and method.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bernard Dov Adelstein, Eric R. Johnston, and Stephen R. Ellis "Spatial sensor lag in virtual environment systems", Proc. SPIE 1833, Telemanipulator Technology, (26 March 1993); https://doi.org/10.1117/12.142108
PROCEEDINGS
12 PAGES


SHARE
Advertisement
Advertisement
Back to Top