Translator Disclaimer
9 August 1979 Measuring Equipment For Testing The Directrix Of High-Resolution Wolter-Type Telescopes
Author Affiliations +
Proceedings Volume 0184, Space Optics Imaging X-Ray Optics Workshop; (1979) https://doi.org/10.1117/12.957446
Event: 1979 Huntsville Technical Symposium, 1979, Huntsville, United States
Abstract
The measuring equipment has been designed and constructed for testing the directrix of Wolter-type telescope mirrors. Due to the high accuracy required its design is based on the principles of industrial metrology and has been adapted to the specific problems encountered with the Wolter-type tlescope. Measurement is carried out by an inductive probe which, as a result of its low contact pressure, can also be used on polished surfaces. The meridian curve is compared with a test glass of optimum spherical surface so that deviations in the order of 1/100 Tim can be detected. A digital scale is used to localize the contact points measured in mirror axis direction. In the final version, the two measured values obtained are fed into a calculator for nominal/actual comparision. The differences obtained between directrix and test glass are compared with the nominal values already stored in the calculator and the resulting deviations then recorded on an analog recorder.
© (1979) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Erich Heynacher and Dieter Reinhardt "Measuring Equipment For Testing The Directrix Of High-Resolution Wolter-Type Telescopes", Proc. SPIE 0184, Space Optics Imaging X-Ray Optics Workshop, (9 August 1979); https://doi.org/10.1117/12.957446
PROCEEDINGS
5 PAGES


SHARE
Advertisement
Advertisement
Back to Top