You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
30 June 1993Design of labels to be placed on film to be digitized or copied
Tests were performed to determine the color characteristics that would permit the information contained on labels placed on x-ray films to be captured by laser scanner film digitization and by ultraviolet light film copying. Tests of laser film digitization demonstrated that the colors allowing transmission of the He-Ne laser beam were red, orange, pink, yellow, and white. The ink colors absorbing the He-Ne laser beam were green, blue, and black. Labels on films should be placed in areas of the film that are clear or lightly exposed. Experiments performed to determine the label requirements for film copying demonstrated that white, clear and pink labels transmitted the ultraviolet light used in our film copier and thus proved to be good background colors for the paper. Black and green ink and black crayon were the most opaque colors and would therefore prove to be the best lettering colors. Because of the relatively low intensity of the ultraviolet light source, the paper stock used for these labels should be relatively thin and should be placed on areas of the film that are clear or lightly exposed.
The alert did not successfully save. Please try again later.
Dennis Stewart, Louis Possilico, Matthew T. Freedman M.D., Shih-Chung Benedict Lo, Martha C. Nelson M.D., "Design of labels to be placed on film to be digitized or copied," Proc. SPIE 1897, Medical Imaging 1993: Image Capture, Formatting, and Display, (30 June 1993); https://doi.org/10.1117/12.146996