20 October 1993 UCLA double-beam infrared camera system
Author Affiliations +
Abstract
This paper describes a new infrared imaging system being developed at UCLA for use on both the Lick Observatory 3-m telescope and the W.M. Keck 10-m telescope. The instrument has a relatively wide field of view on each telescope and is intended for infrared surveys and deep imaging. To enhance efficiency, the new instrument incorporates a dichroic beam splitter to provide two simultaneous imaging systems, one short-wave (SW) from 1 - 2.5 micrometers and one long-wave (LW) from 2 - 5 micrometers . Each wavelength channel is independently optimized. The SW channel contains a Rockwell NICMOS3 256 X 256 HgCdTe array and the LW channel has an SBRC 256 X 256 InSb array. The thermal design employs a closed cycle cooler. A control and data acquisition system based on transputers and high speed analog electronics is being developed to handle the high data rates.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ian S. McLean, Ian S. McLean, Eric E. Becklin, Eric E. Becklin, George Brims, George Brims, John Canfield, John Canfield, Suzanne Casement, Suzanne Casement, Donald Frank Figer, Donald Frank Figer, Frank Henriquez, Frank Henriquez, Anthony Huang, Anthony Huang, W. Timothy Liu, W. Timothy Liu, Bruce A. Macintosh, Bruce A. Macintosh, Harry I. Teplitz, Harry I. Teplitz, } "UCLA double-beam infrared camera system", Proc. SPIE 1946, Infrared Detectors and Instrumentation, (20 October 1993); doi: 10.1117/12.158704; https://doi.org/10.1117/12.158704
PROCEEDINGS
21 PAGES


SHARE
RELATED CONTENT


Back to Top