Paper
17 December 1979 New Developments In The Use Of Thermal Measurement Techniques For Structural Design Engineering
J. M. B. Webber
Author Affiliations +
Abstract
This paper describes a novel method of stress determination in structures under dynamic loading conditions. The principle is based on the thermodynamic property of a material in which, under adiabatic conditions, heat is produced or absorbed in direct proportion to the magnitude of the stresses to which it is being subjected. An instrument is described which uses infra-red radiation to measure, remotely, the resulting minute local temperature changes in the material, with oscillating mirrors to provide a raster type scan of the item under test. Spatial resolution down to 1 mm and a temperature discrimination of about 0.002 °C have been achieved, this latter representing a stress change of less than 300 lb/in2 in steel.
© (1979) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. M. B. Webber "New Developments In The Use Of Thermal Measurement Techniques For Structural Design Engineering", Proc. SPIE 0197, Modern Utilization of Infrared Technology V, (17 December 1979); https://doi.org/10.1117/12.958011
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Structural design

Structural engineering

Mirrors

Raster graphics

Spatial resolution

Temperature metrology

Thermodynamics

Back to Top