Translator Disclaimer
Paper
13 August 1993 Modeling of diode end-pumped cw and Q-switched Nd:YAG laser oscillators
Author Affiliations +
Abstract
A theoretical model which describes the performance of cw and Q-switched diode end pumped laser oscillators was developed. The model takes into account the pumping geometry, the cavity geometry, the physical parameters of the lasing material, and various mechanisms of losses in the oscillator. Among the analytical predictions of this model are: threshold of lasing, total output energy, and temporal behavior of the laser pulse in the case of a Q-switched operation. In most of the models applied until now, an assumption of small gain was made in order to get an analytic expression for the output power of the laser in steady state conditions. In the present model this limiting assumption is dropped. In addition, in the Q-switched part of the model an analytical estimation is incorporated for two efficiency factors: one describing the fill factor of the lasing mode and the other considering the finite lifetime of the lower laser level.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sagie Tsadka, Raphael Lavi, and Steven M. Jackel "Modeling of diode end-pumped cw and Q-switched Nd:YAG laser oscillators", Proc. SPIE 1971, 8th Meeting on Optical Engineering in Israel: Optical Engineering and Remote Sensing, (13 August 1993); https://doi.org/10.1117/12.150993
PROCEEDINGS
12 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Optically triggered Cr:YAG Q-switched Nd:YAG laser
Proceedings of SPIE (February 15 2011)
Diode-laser-side-pumped Nd:YAG Q-switch TEM00 laser
Proceedings of SPIE (September 30 1996)
Greater than 100 watt average power at 0.53 um with...
Proceedings of SPIE (August 16 1994)
3.5-W output, diode-pumped Q-switched 532-nm laser
Proceedings of SPIE (August 16 1994)

Back to Top