12 November 1993 Active mirror based on the bimetallic strip effect
Author Affiliations +
A cost-effective high heat load mirror based on the compensation for thermal deformation by the bimetallic strip effect has been studied. A theoretical description of the heat loaded bimetallic strip is given. Careful selection of two materials having complementary thermal properties allows efficient correction of thermal bending. Such a system could also be used as a very simple bender by tuning the temperature gradient across the two layers.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jean Susini, Jean Susini, Michel Thomas, Michel Thomas, } "Active mirror based on the bimetallic strip effect", Proc. SPIE 1997, High Heat Flux Engineering II, (12 November 1993); doi: 10.1117/12.163807; https://doi.org/10.1117/12.163807


A design study of mirror modules and an assembly based...
Proceedings of SPIE (September 03 2015)
Porous media heat exchangers for high heat flux applications
Proceedings of SPIE (February 24 1993)
Beam-splitting mirrors for an APS beamline
Proceedings of SPIE (October 04 2007)
Cesic and silicon a perfect combination for high performance...
Proceedings of SPIE (September 16 2007)
Design and fabrication of a 1.2 m long internally cooled...
Proceedings of SPIE (November 20 1996)
Bendable mirrors
Proceedings of SPIE (November 12 1998)

Back to Top