29 November 1993 Model calibration and beam control systems for storage rings
Author Affiliations +
Abstract
Electron beam storage rings and linear accelerations are rapidly gaining worldwide popularity as scientific devices for the production of high-brightness synchrotron radiation. Today, everybody agrees that there is a premium on calibrating the storage ring model and determining errors in the machine as soon as possible after the beam is injected. In addition, the accurate optics model enables machine operators to predictably adjust key performance parameters, and allows reliable identification of new errors that occur during operation of the machine. Since the need for model calibration and beam control systems is common to all storage rings, software packages should be made that are portable between different machines. In this paper, we report on work directed toward achieving in-situ calibration of the optics model, detection of alignment errors, and orbit control techniques, with an emphasis on developing a portable system incorporating these tools.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
William Jeffrey Corbett, William Jeffrey Corbett, Martin J. Lee, Martin J. Lee, Volker G. Ziemann, Volker G. Ziemann, } "Model calibration and beam control systems for storage rings", Proc. SPIE 2013, Electron-Beam Sources of High-Brightness Radiation, (29 November 1993); doi: 10.1117/12.164800; https://doi.org/10.1117/12.164800
PROCEEDINGS
12 PAGES


SHARE
Back to Top