3 September 1993 Computer simulation of electron optical characteristics of accelerating tube for high-voltage electron microscope
Author Affiliations +
Abstract
Numerical calculations were conducted on the electron optical characteristics of the accelerating tube (AT) for the high voltage electron microscope. The emitted electrons are firstly accelerated to V0 by the TE gun or the FE gun and finally to Va by the AT which consists of 34 electrodes with the inner diameter of 33 mm and has the overall length of 1423 mm. The AT is treated as a thick electrostatic accelerating lens. Several electron optical problems arising from a combination of the AT with a thermionic emission (TE) gun or a field emission (FE) gun are studied. For the TE gun the aberration effect of the AT lens is found to be safely neglected for any combination of Va and V0. In the case of the FE gun, on the other hand, the aberration effect of the AT lens can not be neglected and deteriorates the brightness of the beam. This situation can be overcome by placing an electron lens between the FE gun and the AT.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Toshimi Ohye, Toshimi Ohye, Chiaki Morita, Chiaki Morita, Hiroshi Shimoyama, Hiroshi Shimoyama, } "Computer simulation of electron optical characteristics of accelerating tube for high-voltage electron microscope", Proc. SPIE 2014, Charged-Particle Optics, (3 September 1993); doi: 10.1117/12.155700; https://doi.org/10.1117/12.155700
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT

Ray tracing model for the stretching calculation of the new...
Proceedings of SPIE (September 04 2002)
Achromatic deflection system
Proceedings of SPIE (October 24 1996)
New design for a field emission electron gun immersed in...
Proceedings of SPIE (September 24 1995)

Back to Top