1 October 1993 ISOPHOT calibration facility and pre-flight characterization
Author Affiliations +
Abstract
A calibration facility simulating the optical and cryogenic environment of the ISO satellite has been built for characterizing the ISOPHOT instrument. This facility uses a commercially calibrated, 900 K--blackbody radiation source and an optics at room temperature to provide an f/15 beam to the instrument which is contained in a LHe-cryostat. The low level infrared flux levels of ISO are obtained by use of a light sealed instrument chamber and cold attenuation filters. The infrared flux can be calculated using the known blackbody emission and the cold calibrated transmission spectra of the filters. The calibration facility further provides a scanning mechanism, a light modulator and filters for polarization measurements and wavelength calibrations of the ISOPHOT spectrometer channels. Electrical support equipment for the instrument operation and software for data archiving and analysis have been customized for this project. The test program comprised a standardized acceptance test for the entire instrument and special tests addressing individual instrument properties. The data obtained contain the photometric sensitivities of ISOPHOT, optimized instrument settings, reference data for the integrated system tests and inputs for the ongoing mission planning.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Juergen Wolf, Carlos Gabriel, Ulrich Groezinger, Ingolf Heinrichsen, Gerhard Hirth, Stefan Kirches, Dietrich Lemke, Josef Schubert, Bernhard Schulz, Clemens N. Tilgner, Manfred Boison, Albrecht Frey, Ib Lundgaard Rasmussen, Robert Wagner, Klaus Proetel, "ISOPHOT calibration facility and pre-flight characterization", Proc. SPIE 2019, Infrared Spaceborne Remote Sensing, (1 October 1993); doi: 10.1117/12.157816; https://doi.org/10.1117/12.157816
PROCEEDINGS
13 PAGES


SHARE
Back to Top