6 August 1993 High-performance visual servoing for robot end-point control
Author Affiliations +
Proceedings Volume 2056, Intelligent Robots and Computer Vision XII: Active Vision and 3D Methods; (1993); doi: 10.1117/12.150215
Event: Optical Tools for Manufacturing and Advanced Automation, 1993, Boston, MA, United States
The application of robots to high-speed manufacturing is limited by problems such as teaching locations, accuracy and cycle time. This paper discusses how visual servoing could be used to ameliorate these problems. Preliminary experimental results are presented showing the use of visual servoing for robot end-point control. A VME-bus based real-time system performing both robot control and image processing is used. The machine vision subsystem, based on Datacube pipeline processing modules and an APA-512+ binary feature extraction module, analyzes the camera data at CCIR video field rate (50 Hz).
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peter Ian Corke, "High-performance visual servoing for robot end-point control", Proc. SPIE 2056, Intelligent Robots and Computer Vision XII: Active Vision and 3D Methods, (6 August 1993); doi: 10.1117/12.150215; https://doi.org/10.1117/12.150215


Robot vision



Machine vision


Computer vision technology


Vision For Control Of A Manipulating End Effector
Proceedings of SPIE (January 17 1985)
The XH map algorithm A method to process stereo...
Proceedings of SPIE (October 24 2005)
Mobile Robot Guidance By Visual Perception
Proceedings of SPIE (June 09 1986)
A Nonlinear Learning Controller for Robotic Manipulators
Proceedings of SPIE (March 27 1987)
Fast, cheap, and easy system for outside vision on Mars
Proceedings of SPIE (August 20 1993)

Back to Top