15 February 1994 Autopulsar-an alternative treatment mode for the CO2 medical laser
Author Affiliations +
Proceedings Volume 2086, Medical Applications of Lasers; (1994) https://doi.org/10.1117/12.169143
Event: Europto Biomedical Optics '93, 1993, Budapest, Hungary
When used in continuous wave (cw) mode the CO2 laser is an effective tool for vaporizing unwanted tissue, however, there is the possibility of the accumulation of thermal energy in the good tissue close to the point of treatment. If this thermal energy is high then post operative pain and scarring could result. This is avoidable by delivering the energy in short pulses with the gap between those pulses being greater than the thermal relaxation time of the tissue (which can vary according to tissue type that is typically 0.5 to 3.0 ms). Simply chopping the laser beam rapidly would produce the desired thermal effect but would waste a large percentage of the laser energy and greatly extend the treatment time since the average output power of the laser is compromised. The ideal scenario is where the laser power is enhanced for the on period producing an average power similar to that obtained in cw mode.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ruth Anne Waters, Ruth Anne Waters, R. Marc Clement, R. Marc Clement, N. Richard Ledger, N. Richard Ledger, K. Williams, K. Williams, } "Autopulsar-an alternative treatment mode for the CO2 medical laser", Proc. SPIE 2086, Medical Applications of Lasers, (15 February 1994); doi: 10.1117/12.169143; https://doi.org/10.1117/12.169143


The future of lasers in gynecology
Proceedings of SPIE (May 28 1993)
Study Of The Thermal Effect Of A CO2 Scanning Therapeutic...
Proceedings of SPIE (September 15 1986)
Evolution of char free laser surgery from cw to...
Proceedings of SPIE (May 01 1995)
Medical Laser Usage
Proceedings of SPIE (January 30 1987)

Back to Top