Translator Disclaimer
22 September 1993 Development of on-line measurement system for grinding machining
Author Affiliations +
Proceedings Volume 2101, Measurement Technology and Intelligent Instruments; (1993) https://doi.org/10.1117/12.156463
Event: Measurement Technology and Intelligent Instruments, 1993, Wuhan, China
Abstract
In this paper a new type of intelligent on-line measurer is developed which is used for on-line measuring diametershape and place value of the axle. In the meter MCS-51''1 microcontroller is adopted. The sensor is an inductance transducer. The dynamic character of the sensor is analyzed in detail. That is say how the poor dynamic character of the meter make the on-line measuring error If the meter is a first-order system and the input function is a ramp function the respond error of the system to the input is analyzed. With this method the system error is compensated by the software. So the accuracy of the measuring result is high enough. In order to keep the measuring system work at worksite in normal condition the anti-interference techniques are adopted. In addition to hardware anti-interference technique is used the redundant programming technique and watchdog system are used too in the software. lastly the real measuring result is given.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiwen Wang and Da Xiu Chen "Development of on-line measurement system for grinding machining", Proc. SPIE 2101, Measurement Technology and Intelligent Instruments, (22 September 1993); doi: 10.1117/12.156463; https://doi.org/10.1117/12.156463
PROCEEDINGS
5 PAGES


SHARE
Advertisement
Advertisement
Back to Top