Paper
25 May 1994 Long-pulse high-repetition-rate transversely excited CO2 laser for material processing
Yuji Okita, Koichi Yasuoka, Akira Ishii, Tohru Tamagawa
Author Affiliations +
Abstract
Using a TE-CO2 laser, we could obtain a long-pulsed laser beam of low initial spike by controlling the discharge current by a pulse forming network and optimizing the gas composition, discharge length to resonator length ratio, and output mirror reflectivity. The maximum laser output was 1.1 J; the initial spike energy, 100 kW; the tail output, 56 kW; and the 16 (mu) sec (FWHM). The maximum repetition rate was 500 Hz. A new type of circuit with small pre-ionization current made it possible to operate the laser at a high repetition rate so as to prolong the laser life. When a 5-inch lens was used, the laser power density at the focal point was 1*108 W/cm2, making it possible to use the laser with an unusually high energy density without causing the breakdown of air insulation. In fact, we succeeded in fine- cutting a 0.5 mm thick alumina ceramic with the laser. It was found that unlike other working methods, the newly developed laser does not cause cracks in ceramic work pieces.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yuji Okita, Koichi Yasuoka, Akira Ishii, and Tohru Tamagawa "Long-pulse high-repetition-rate transversely excited CO2 laser for material processing", Proc. SPIE 2118, Gas, Metal Vapor, and Free-Electron Lasers and Applications, (25 May 1994); https://doi.org/10.1117/12.176674
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Capacitors

Ceramics

Electrodes

Laser cutting

Pulsed laser operation

Laser development

Mirrors

RELATED CONTENT

Coaxially excited pulsed-gas lasers for precise machining
Proceedings of SPIE (February 07 2000)
Slab overtone carbon monoxide laser
Proceedings of SPIE (February 19 2009)
Pulse Power For The Chirp XeCl Laser
Proceedings of SPIE (April 10 1989)
Ultraviolet longitudinally excited nitrogen lasers
Proceedings of SPIE (April 01 1994)
Super small excimer laser
Proceedings of SPIE (September 01 1991)

Back to Top