14 May 1980 Sandwich Holography For Compensation Of Rigid Body Motion And Reposition Of Large Objects
Author Affiliations +
Proceedings Volume 0215, Recent Advances in Holography; (1980) https://doi.org/10.1117/12.958424
Event: 1980 Los Angeles Technical Symposium, 1980, Los Angeles, United States
New possibilities for engineering uses of hologram interferometry are shown by two experiments. Sandwich holography has been used for measurements of in-plane displacement of an object. The sign of the displacement is found by tilting the sandwich hologram during re-construction. Fringes caused by in-plane rigid body motion can be compensated for, and local displacements evaluated. It is shown that an in-plane motion of more than 1 mm of the object placed at a distance of about 1 m from the plates can be compensated for and a local tilt of 1.5 x 10-3 degrees evaluated. An object, 1 m long was placed in a fixture and a recording of the object was performed on one of the plates in the sandwich pair. Then the object was removed from the fixture as well as the holographic laboratory and holes were drilled in one wall of the object in a workshop. Then the object was put back in the fixture and the second plate in the sandwich pair was recorded. At reconstruction the influence caused by a slight reposition error was compensated for by tilting the sandwich hologram and then the deformation around the drilled holes could be studied.
© (1980) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hans Bjelkhagen "Sandwich Holography For Compensation Of Rigid Body Motion And Reposition Of Large Objects", Proc. SPIE 0215, Recent Advances in Holography, (14 May 1980); doi: 10.1117/12.958424; https://doi.org/10.1117/12.958424

Back to Top