Laser writing: a new technique for fabrication of electronic and optoelectronic Y-Ba-Cu-O devices and circuits

W. Xiong; Witold Kula; Roman Sobolewski; J. R. Gavaler

doi:10.1117/12.181003

2 July 1994 Laser writing: a new technique for fabrication of electronic and optoelectronic Y-Ba-Cu-O devices and circuits

W. Xiong, Witold Kula, Roman Sobolewski, J. R. Gavaler

Author Affiliations +

Proceedings Volume 2160, Superconductive Devices and Circuits; (1994) https://doi.org/10.1117/12.181003
Event: OE/LASE '94, 1994, Los Angeles, CA, United States

Abstract

We report our studies on the fabrication of YBa₂Cu₃O_x (YBCO) thin-film structures, patterned with a laser-writing technique. We demonstrate that this patterning method can be successfully implemented in fabricating a variety of electronic and optoelectronic high-T_c devices and circuits. Laser patterning implements a focused beam from a continuous-wave Ar- ion laser to selectively heat-up an epitaxial YBCO film in a controlled (oxygen or oxygen-free) atmosphere. Depending on the film's initial oxygen content and the ambient atmosphere, laser heating allows oxygen to diffuse in or out of the annealed region and form oxygen-rich (YBa₂Cu₃O₇; superconducting) patterns next to oxygen-depleted (YBa₂Cu₃O₆; insulating at low temperature) ones. The width of the YBa₂Cu₃O₇- YBa₂Cu₃O₆ interface is less than 1 micrometers . The laser-writing procedure is noninvasive, does not require a patterning mask, and results in completely planar, monolithic structures, free of surface contamination or edge degradation. Our oxygen-rich lines (typically 4 to 60 micrometers wide), patterned on the high-quality, intentionally deoxygenated YBCO films, exhibit zero resistivity at 90 K and critical current density of approximately 3 MA/cm² at 77 K. Their superconducting properties remain unchanged even after eight months of shelf storage. On the other hand, oxygen-poor regions are semiconducting and characterized at low temperatures by a 3D, variable-length hopping transport. Below 100 K, they exhibit low microwave losses, their dc resistance is above 10 M(Omega) /square, and dielectric permittivity is below 20 at about 10 GHz. A number of devices and circuits patterned by laser writing, such as a microbridge, coplanar transmission line, open- ended coplanar microwave resonator, photoconductive switch, and YBCO field-effect transistor, are presented. All structures are intrinsic to the YBCO material, and they combine in a new and unique way superconducting and dielectric properties of the YBa₂Cu₃O₇ and YBa₂Cu₃O₆ phases.

Citation Download Citation

W. Xiong, Witold Kula, Roman Sobolewski, and J. R. Gavaler "Laser writing: a new technique for fabrication of electronic and optoelectronic Y-Ba-Cu-O devices and circuits", Proc. SPIE 2160, Superconductive Devices and Circuits, (2 July 1994); https://doi.org/10.1117/12.181003

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE