7 September 1994 Fundamental mechanisms of cutting front formation in laser cutting
Author Affiliations +
Proceedings Volume 2207, Laser Materials Processing: Industrial and Microelectronics Applications; (1994) https://doi.org/10.1117/12.184748
Event: Europto High Power Lasers and Laser Applications V, 1994, Vienna, Austria
Abstract
This paper includes a theoretical description of some of the major physical phenomena of thermal cutting processes in general. The work is mainly focussed on the laser cutting process. Qualitatively and some quantitatively descriptions of the melt front propagation and the melt flow is described. The theory, supported by experimental studies shows, that in high quality thermal cutting, the melt flow is in front of the cut kerf with a uniform pressure at the melt surface. Furthermore is shown, that at high cutting rates, evaporation in the lower central part of the cut kerf forces the melt partially around the laser beam, reducing the cut quality. Theoretical estimation of the melt film thickness in thermal cutting is derived. It is shown that there is a maximum cutting speed, where substantial evaporation in the cut front can be neglected. This maximum cutting speed depends upon the thermal properties of the material, the thickness of the material and the pressure from the cutting gas. Furthermore the paper indicates thermal instabilities in the top of the cut front in thermal cutting processes, which is supposed to be responsible for the striation formation.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Flemming O. Olsen, "Fundamental mechanisms of cutting front formation in laser cutting", Proc. SPIE 2207, Laser Materials Processing: Industrial and Microelectronics Applications, (7 September 1994); doi: 10.1117/12.184748; https://doi.org/10.1117/12.184748
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT


Back to Top