7 September 1994 Monitoring of high-power laser beam profiles
Author Affiliations +
Proceedings Volume 2207, Laser Materials Processing: Industrial and Microelectronics Applications; (1994) https://doi.org/10.1117/12.184717
Event: Europto High Power Lasers and Laser Applications V, 1994, Vienna, Austria
Abstract
Results are presented of an experimental investigation into various beam sampling and monitoring techniques applicable to high power laser systems. A hole matrix mirror displayed good sampling fidelity, and power handling capabilities in excess of 10 kW have been demonstrated. A holographic beam sampler displayed poor spatial fidelity in the sampled beams. The transmission leakage through a dielectric high reflector was shown to be an unreliable method of beam sampling due to non-uniform transmission characteristics. Phase profiles of beams with various aberrations have been recorded using a self referencing Mach Zehnder and a point diffraction interferometer. The results show a good correspondence with interferograms of the same aberrations obtained conventionally. The applicability of these devices to particular laser types in industrial environments is discussed.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael A. O'Key, Michael R. Osborne, Paul A. Hilton, "Monitoring of high-power laser beam profiles", Proc. SPIE 2207, Laser Materials Processing: Industrial and Microelectronics Applications, (7 September 1994); doi: 10.1117/12.184717; https://doi.org/10.1117/12.184717
PROCEEDINGS
11 PAGES


SHARE
RELATED CONTENT

Interferometric devices for angular measurements
Proceedings of SPIE (August 19 1996)
Study on anti-laser high-reflection coating
Proceedings of SPIE (November 14 2007)
193 nm laser induced spectral shift in HR coated mirrors
Proceedings of SPIE (December 31 2009)
Survey Of Properties Of Volume Holographic Materials
Proceedings of SPIE (May 25 1989)

Back to Top