28 July 1994 Grating reflectors for erbium-doped lithium niobate waveguide lasers
Author Affiliations +
A grating fabrication technology has been established for producing DFB- /DBR-grating structures in Er-doped Ti:LiNbO3 waveguide lasers. It is based on holographically defined resist gratings transferred into the surface of LiNbO3 waveguides using reactive ion etching with SF6 gas as the dry etching technique. For a sample with a 24 mm long surface relief grating of 346 nm period, a transmission drop of -11.7 dB, a filter bandwidth as small as 0.08 nm, a Bragg resonance wavelength at 1528.4 nm very close to the Erbium absorption line at 1531 nm and excess losses attributed to the grating of only 1 to 2 dB were measured.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Juergen Soechtig, Helmut Schuetz, Richard Widmer, Hans W. Lehmann, Robert Gross, "Grating reflectors for erbium-doped lithium niobate waveguide lasers", Proc. SPIE 2213, Nanofabrication Technologies and Device Integration, (28 July 1994); doi: 10.1117/12.180951; https://doi.org/10.1117/12.180951


Model-based etch profile simulation of PSM films
Proceedings of SPIE (October 01 2013)
Second order add/drop filter with a single ring resonator
Proceedings of SPIE (February 20 2017)
Silicon-based low-loss photonic crystal waveguides
Proceedings of SPIE (March 07 2007)
Fabrication of integrated lens pair test device
Proceedings of SPIE (February 28 2005)
Diamond waveguides: toward an all-diamond platform
Proceedings of SPIE (January 08 2008)

Back to Top