5 July 1994 Fast, wide-dynamic range, low-voltage tip/tilt mirror
Author Affiliations +
Abstract
Tip/tilt mirrors are widely used to stabilize astronomical images during integration because tip/tilt image stabilization systems provide a large gain in image quality with a relatively simple control system[KM93,Mc93,0193]. In solar vector magnetographs the polarization analysis section generally precedes the fip/tilt mirror to avoid systematic polarization errors[Ru88,R091]. This causes a magnification of the apparent pointing errors so that the dynamic range requirements for a tip/tilt mirror are multiplied by the magnification. We have used tip/tilt mirrors based on high voltage piezo electric stacks. These units have relatively limited throw of +/- 65 arcsec, and require stack voltages of 0 to 1000 volts. In addition these units displayed a high Q resonance around 200 Hz which limited the stable closed loop image stabilization bandwidth to around 20 to 30 Hz. The tip/tilt system in our ground based instrument at Sacramento Peak Observatory has always been limited by the limited dynamic range of the tip/tilt mirror[St90,St92].
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kim Strohbehn, Kim Strohbehn, Bernard Kluga, Bernard Kluga, David M. Rust, David M. Rust, } "Fast, wide-dynamic range, low-voltage tip/tilt mirror", Proc. SPIE 2221, Acquisition, Tracking, and Pointing VIII, (5 July 1994); doi: 10.1117/12.178950; https://doi.org/10.1117/12.178950
PROCEEDINGS
4 PAGES


SHARE
RELATED CONTENT

Linear array of CMOS double pass metal micromirrors
Proceedings of SPIE (September 23 1996)
Recent developments with orthogonal-transfer CCD
Proceedings of SPIE (April 25 1997)
Adaptive secondary mirror developments at UCL
Proceedings of SPIE (July 07 2000)
Design and testing of a one meter membrane mirror with...
Proceedings of SPIE (August 18 2005)
Small adjustable mirror mount for dynamic environments
Proceedings of SPIE (September 30 2004)

Back to Top