4 November 1994 Fabrication and properties of multilayer porous silicon filters
Author Affiliations +
Proceedings Volume 2253, Optical Interference Coatings; (1994) https://doi.org/10.1117/12.192162
Event: 1994 International Symposium on Optical Interference Coatings, 1994, Grenoble, France
Porous silicon multilayer systems formed by different techniques were investigated. Type I layer systems are fabricated by changing the current density during the anodic etch process. Type II samples are formed with a constant current density but using a substrate with alternating doping levels. The superlattice structure is clearly visible in transmission electron microscope pictures. The quality of the interfaces depends on the formation technique. Porous silicon multilayer systems exhibit sharp peaks in the reflectance spectrum and can be used as filters. The line narrowing of the broad photoluminescence band of porous silicon by a Fabry- Perot filter structure is demonstrated.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael G. Berger, Michael G. Berger, S. Frohnhoff, S. Frohnhoff, Ruedger Arens-Fischer, Ruedger Arens-Fischer, M. Thoenissen, M. Thoenissen, C. Dieker, C. Dieker, H. Muender, H. Muender, Hans Luth, Hans Luth, Wolfgang Theiss, Wolfgang Theiss, M. Arntzen, M. Arntzen, } "Fabrication and properties of multilayer porous silicon filters", Proc. SPIE 2253, Optical Interference Coatings, (4 November 1994); doi: 10.1117/12.192162; https://doi.org/10.1117/12.192162


Back to Top