1 April 1994 Influence of retained austenite on properties of steels and cast irons after surface melting
Author Affiliations +
Proceedings Volume 2257, Russia National Conference: Industrial Lasers and Laser Material Processing; (1994) https://doi.org/10.1117/12.171630
Event: Industrial Lasers and Laser Material Processing: Russian National Conference, 1993, Shatura, Moscow Region, Russian Federation
Abstract
The retained austenite fraction in the surface remelted layer of the steels and cast irons after heating by the surface heat source is determined by the degree of the carbide phase dissolution at the end of the heating stage. The amount of the retained austenite correlates with the highest temperature at the end of the heating stage. There is an optimum value of the retained austenite fraction in the surface remelted layer, the said optimum value corresponds to the highest values of the resistance to the wear, contact fatigue and anodic dissolution of the steels and cast irons.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
V. S. Kraposhin, V. S. Kraposhin, "Influence of retained austenite on properties of steels and cast irons after surface melting", Proc. SPIE 2257, Russia National Conference: Industrial Lasers and Laser Material Processing, (1 April 1994); doi: 10.1117/12.171630; https://doi.org/10.1117/12.171630
PROCEEDINGS
6 PAGES


SHARE
Back to Top