Paper
1 May 1994 Experiments with an S-band vircator
D. E.T.F. Ashby, J. Allen, K. C. Hawkins
Author Affiliations +
Proceedings Volume 2259, XVI International Symposium on Discharges and Electrical Insulation in Vacuum; (1994) https://doi.org/10.1117/12.174574
Event: XVI International Symposium on Discharges and Electrical Insulation in Vacuum, 1994, Moscow-St. Petersburg, Russian Federation
Abstract
The experiments described used a Vircator operating in the frequency range 2.5 - 3.5 MHz and powered by a 10 ohm, 100 ns pulse generator operating at voltages up to 600 kV. The Vircator had a tunable resonant cavity and power was coupled out from one side. A series of experiments were carried out to elucidate various aspects of the Vircator's behavior. The first experiment conclusively demonstrated reflexing in which electrons from the virtual cathode region re-enter the anode/cathode gap and affect the diode impedance. The second experiment demonstrated the effect of the anode/cathode gap on the behavior of the reflexing electrons. The third experiment showed that the power output depended upon the thickness of the anode foil, and more surprisingly, on the thickness of the foil forming the adjustable rear wall of the cavity.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
D. E.T.F. Ashby, J. Allen, and K. C. Hawkins "Experiments with an S-band vircator", Proc. SPIE 2259, XVI International Symposium on Discharges and Electrical Insulation in Vacuum, (1 May 1994); https://doi.org/10.1117/12.174574
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electrons

Diodes

Aluminum

S band

Signal detection

Plasma

Pulse generators

Back to Top