Rapid production of large-area polymeric cold mirror via a simultaneous layer formation process

John A. Wheatley; Ray A. Lewis; Walter J. Schrenk; W. Lutz; Gregg A. Motter

doi:10.1117/12.185798

7 September 1994 Rapid production of large-area polymeric cold mirror via a simultaneous layer formation process

John A. Wheatley, Ray A. Lewis, Walter J. Schrenk, W. Lutz, Gregg A. Motter

Proceedings Volume 2262, Optical Thin Films IV: New Developments; (1994) https://doi.org/10.1117/12.185798
Event: SPIE's 1994 International Symposium on Optics, Imaging, and Instrumentation, 1994, San Diego, CA, United States

Abstract

Recent technology advances in the processing of polymeric multilayers has made possible the production of an all polymeric cold mirror reflector via coextrusion processing. The simultaneous formation of up to 5200 alternating layers of optically dissimilar polymers allows the continuous extrusion of a self supporting cold mirror at high linear speeds and widths of over 0.6 m (2 ft). The material can be post formed into shallow 3-dimensional reflector shapes, given proper attention to the initial film optical properties, the final part geometry, and forming considerations. The self supporting nature of the film allows it to be wound on rolls and stored for later part fabrication. Reflectance of 95-99% over the visible wavelengths has been achieved with commercially available polymers. The polymers used have high transmission in the near infrared region of 700-2000 nm, and sharp cut- on and cut-offs have been achieved. Uniformity of optical properties across the surface of the film will be discussed, as will thickness, angle of incidence, and temperature effects. The large area capability of this material may make possible applications for heat/light separation not previously viable due to deposition chamber size limitations or the high cost per area of conventional deposition technologies. Scale up of the process to much larger widths is feasible and will be discussed. Prototyped parts and potential applications of this new material will also be covered.

Citation Download Citation

John A. Wheatley, Ray A. Lewis, Walter J. Schrenk, W. Lutz, and Gregg A. Motter "Rapid production of large-area polymeric cold mirror via a simultaneous layer formation process", Proc. SPIE 2262, Optical Thin Films IV: New Developments, (7 September 1994); https://doi.org/10.1117/12.185798

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available